DBxe
The DBxe pump series sets a new standard for energy-efficient water pumps
- Delivery size: 32 to 150 mm
- Capacity: Up to 550 m3/hr
- Head: Up to 100 meters
- Speed from 1450 & 2900 rpm, 1760 & 3500 rpm
CPHM
Conforming to DIN 24256/ISO 2858, Back pull-out design, Gland packed/mechanical seal, 50HZ/60HZ availability
- Delivery size from 20 mm to 200 mm (3/4 to 8)
- Capacity up to 750 m3/hr (3300 US gpm)
- Head up to 150 metres (480 ft.)
- Temperature (-) 30° C to 90° C
RKB
Ring section diffuser casing, Stuffing box cooling for high temperature applications, Available in vertical configuration
- Delivery size up to 250 mm
- Capacity up to 850 m3/hr
- Head up to 850 metres
- Working pressure 40 to 64 bar
MSMO
Horizontal and vertical execution option available, 50HZ/60HZ availability
- Capacity up to 700 m3/hr
- Head up to 500 metres
- Outlet up to 7
FLD System
Plug and play packaged system delivered on site, Cost effective solution for small premises, Available in single & three phase motors
- Flow range up to 400 lpm
- Head up to 6 bars
- Operating sprinklers up to 8 nos
KFE
Single point responsibility of entire pump set, Compact design, Low maintenance
- Flow: 97 to 490 m3/hr
- Head: 56 to 145 m
- Type of engine: Radiator / Heat exchanger
- Speed range: 1500 to 3000 rpm
GK
Highly energy efficient, Sealing/flushing water not required, Self-venting design
- Delivery size from 65 to 125 mm
- Capacity from 20 to 450 m3/hr
- Head up to 60 metres
- Working pressure up to 16 bar
DSM
Kirloskar DSM/DSMT split case pumps are horizontally mounted and axially split casing type, two stage pumps.
- Delivery size from 50 mm to 150 mm
- Capacity up to 470 m3/hr
- Head up to 180 metres
- 50HZ/60HZ availability
Split Case Pump – UP
Kirloskar UP series are horizontal split casing type pumps with suction, discharge nozzles and their supporting feet integrally cast in the lower half casing.
- Delivery size up to 1220 mm
- Capacity up to 40,000 m3/hr
- Head up to 220 metres
- 50HZ/60HZ availability
KCIL
Multi-stage vertical inline pump for high head applications
- Head Range: Up to 323 metres
- Discharge Range: Up to 110 m3/hr
- Power Ratings: 0.37 to 45 Kw (0.5 to 60 HP)
- Voltage Range: 370 to 440 volts (three phase)
KVM
Pressure boosting and lifting water in apartments and bungalows
- Head : Upto 175 Meters
- Capacity : Upto 25 m3/hr
- Power Ratings : Up to 5.5 kW (7.5HP)
- Protection : IP 44
i-HT
Kirloskar i-HT axially split case centrifugal pumps are available in both single stage and double stage construction, backed with a maintenance-friendly design and optimum efficiencies.
- Delivery size up to 300 mm
- Capacity up to 1300 m3/hr
- Head up to 250 metres
- Temperature from 8° C to 90° C
KirloSmart Fire
KirloSmart Fire is an IoT-based remote monitoring solution specially designed for firefighting pump systems.
- 24×7 fire pump health monitoring
- Instant alerts and notifications
- Emergency readiness assurance
- Remote visibility through dashboard
Containerized FF system
Kirloskar’s Containerised Fire Pump Set is delivered complete and ready for installation, incorporating pumps, drivers, control systems and pipework all in one set.
- Tailor-made as per customer requirement
FLD System
The Fire Sprinkler Pump Set is a unique plug and play firefighting pump covering small and medium areas like bungalows, villas, shops, small/medium offices, godowns, etc.
- Flow range up to 400 lpm
- Head up to 6 bars
- Operating sprinklers up to 8 nos
KCIL
Multi-stage vertical inline pump for high head applications
- Head Range: Up to 323 metres
- Discharge Range: Up to 110 m3/hr
- Power Ratings: 0.37 to 45 Kw (0.5 to 60 HP)
- Voltage Range: 370 to 440 volts (three phase)
KU Series
High Efficiency and Energy Saving Design, CED – Cathode Electro Deposition Coating
- Head Range: Up to 251 metres
- Discharge Range: Up to 350 LPM
- Power Ratings: 0.37 to 4.0 kW (0.5 to 5.5 HP)
- Type of Cooling: Oil-cooled
KDI
High Efficiency & Energy Saving, Design to Prevent Overloading
- Head Range – Up to 80 Metres
- Discharge Range – Up to 39 LPS
- Power Rating – 1.5 to 22 kW (2 to 30 HP)
- Voltage Range – 350 to 440 Volts (Three Phase)
KDT
Innovative design manufactured at a state-of-the-art plant, Design to Prevent Overloading, Wide Voltage Design
- Head Range : Upto 98 metres
- Discharge Range : Upto 20 lps
- Power Ratings : 3.7 to 15 kW (5 to 20 HP)
- Voltage Range : 300 to 440 Volts (Three Phase)
KOS
Wide Voltage Design, Dynamically Balanced Rotating Parts, Replaceable Wearing Parts, Easy Maintainable Design
- Head Range: Up to 76 metres
- Discharge Range: Up to 38 LPS
- Power Ratings: 2.2 to 11.2 kW (3 to 15 HP)
- Voltage Range: 200 to 440 volts
Plumbing panels
We offer plumbing panels in two configurations: Analog Plumbing Control Panels & Digital Plumbing Control Panels
- Residential buildings and housing societies
- Commercial complexes and hotels
- Hospitals and institutional buildings
CW
High Efficiency and Energy Saving Design, CED Coating, Replaceable Wearing Parts, Dynamically Balanced Rotating Parts
- Head Range: Up to 70 metres
- Discharge Range: Up to 4800 LPM
- Power Ratings: 0.75 to 15 kW (1 to 20 HP)
- Voltage Range: 380 to 440 volts (three phase)
iNS
Permissible solid size up to 125 mm, Double mechanical seal with back to back arrangement
- Delivery size up to 150 mm
- Capacity up to 300 m3/hr
- Head up to 50 metres
- Max permissible solid size up to 125 mm
HYPN
Minimal Floor Space, Silent Operation, Higher Efficiencies, Increased Energy Savings
- As per the customer requirement
Agnes
High Efficiency & Energy-Saving Design, Compact Reliable and Silent
- Head Range (M): Up to 55 Meters
- Discharge Range: Up to 12 m3/h
- Power Rating: 0.37 to 2.2 kW (0.5 to 3 HP)
- Voltage Range: 220 Volts±10% (Single Phase), 415 Volts±10% (Three Phase)
CWC
Waste water with discharge from water closets. Sewage from restaurants / hotels / camping sites etc. Effluents from abattoirs. Effluents & waste from waste water or effluent treatment plants.
- Head: Up to 45 metres
- Capacity: Up to 7 m3/ h
- Power Rating: 1.2 to 4.0 kW (1.6 to 6 HP)
- Voltage Range: 380 ± 10%
DBxe
The DBxe pump series sets a new standard for energy-efficient water pumps
- Delivery size: 32 to 150 mm
- Capacity: Up to 550 m3/hr
- Head: Up to 100 meters
- Speed from 1450 & 2900 rpm, 1760 & 3500 rpm
UP
Gland packed/mechanical seal, Good suction performance and low NPSH, Vibration-free performance
- Delivery size up to 1220 mm
- Capacity up to 40,000 m3/hr
- Head up to 220 metres
- 50HZ/60HZ availability
KW LC
Vertical inline long coupled through axially split rigid coupling
- Delivery size: up to 200 mm
- Discharge Capacity (Q): 550 m3/hr (150 LPS)
- Total Head: 52 Meters
- Speed (Nominal): 1450 RPM
KW SC
Vertical inline short coupled design, saves space and simplifies piping
- Delivery Size: up to 80 mm
- Discharge Capacity (Q): 150 m3/hr
- Total Head: 58 Meters
- Speed (Nominal): 2900 RPM at 50 Hz
KDI EE4
15 Hp Three-phase Kirloskar monobloc pumps comprise a flatter efficiency curve for efficient operation.
- Head Range – Up to 80 Metres
- Discharge Range – Up to 39 LPS
- Power Rating – 1.5 to 22 kW (2 to 30 HP)
- Voltage Range – 350 to 440 Volts (Three Phase)
CPHM
Conforming to DIN 24256/ISO 2858, Back pull-out design, Gland packed/mechanical seal, 50HZ/60HZ availability
- Delivery size from 20 mm to 200 mm (3/4 to 8)
- Capacity up to 750 m3/hr (3300 US gpm)
- Head up to 150 metres (480 ft.)
- Temperature (-) 30° C to 90° C
GK
Highly energy efficient, Sealing/flushing water not required, Self-venting design.
- Delivery size from 65 to 125 mm
- Capacity from 20 to 450 m3/hr
- Head up to 60 metres
- Working pressure up to 16 bar
SHM
Solid size up to 105 mm, Gland packed/mechanical Seal, 50 Hz/60 Hz availability
- Delivery size up to 200 mm
- Capacity up to 800 m3/hr
- Head up to 90 metres
- Working pressure up to 16 bar
DBxe
The DBxe pump series sets a new standard for energy-efficient water pumps
- Delivery size: 32 to 150 mm
- Capacity: Up to 550 m3/hr
- Head: Up to 100 meters
- Speed from 1450 & 2900 rpm, 1760 & 3500 rpm
CW
High Efficiency and Energy Saving Design, CED Coating, Replaceable Wearing Parts, Dynamically Balanced Rotating Parts
- Head Range: Up to 70 metres
- Discharge Range: Up to 4800 LPM
- Power Ratings: 0.75 to 15 kW (1 to 20 HP)
- Voltage Range: 380 to 440 volts (three phase)
CWC
Special cutter to grind solids into small pieces, Water Tight Cable Connection to ensure no liquid entry into motor
- Head: Up to 45 metres
- Capacity: Up to 7 m3/ h
- Power Rating: 1.2 to 4.0 kW (1.6 to 6 HP)
- Voltage Range: 380 ± 10%
KDI
High Efficiency & Energy Saving, Design to Prevent Overloading
- Head Range – Up to 80 Metres
- Discharge Range – Up to 39 LPS
- Power Rating – 1.5 to 22 kW (2 to 30 HP)
- Voltage Range – 350 to 440 Volts (Three Phase)
KOS
Wide Voltage Design, Dynamically Balanced Rotating Parts, Replaceable Wearing Parts, Easy Maintainable Design
- Head Range: Up to 76 metres
- Discharge Range: Up to 38 LPS
- Power Ratings: 2.2 to 11.2 kW (3 to 15 HP)
- Voltage Range: 200 to 440 volts
KDI – EE2 | EE4 | EE5
15 Hp Three-phase Kirloskar monobloc pumps comprise a flatter efficiency curve for efficient operation.
- Head Range – Up to 80 Metres
- Discharge Range – Up to 39 LPS
- Power Rating – 1.5 to 22 kW (2 to 30 HP)
- Voltage Range – 350 to 440 Volts (Three Phase)
SP Coupled Set IE2
Handling Chemicals, Effluents, Sewage and Ash-Water. De-Watering Foundation, Trenches and Pits. Flood Water Handling.
- Head range: Up to 44 metres
- Discharge Range: Up to 80 LPS
- Power Rating: 0.75 – 18.7 kW & (1 – 25 HP) motor coupled
- Voltage Range: 415±10%
SP Coupled Set IE4
Handling light chemicals, effluents, sewage, ash water, etc. Flood / Rain water handling. Draining foundations, trenches and pits.
- Head range: Up to 36 metres
- Discharge range: Up to 75 LPS
- Power rating: 0.75 – 18.7 kW (1 – 25 HP)
- Voltage range: 415±10%
SP Coupled Set IE5
Handling light chemicals, effluents, sewage, ashwater, etc. Flood / Rain water handling. Draining foundations, trenches and pits.
- Head Range : Upto 32 metres
- Discharge Range : Upto 10 LPS
- Power Rating : 0.75 – 3.7 kW / (1 – 5 HP)
- RPM : 2900
